Place the receiver and if possible the entire stereo system. If you listen to fm radio regularly you can make a fixed antenna that will improve your reception.
The basic design for the fm dipole antenna is shown below.
How to make fm antenna.
This project will tell you how to make a fm antenna out of some medium thin copper wire and a cardboard wrapping paper tube.
Basic half wave dipole antenna.
Connecting the speaker wire to the receiver.
How to make a simple antenna to improve the reception of an fm radio receiver making the antennae out of speaker wire.
Locate the antenna terminals on the fm radio and loosen the lugs that are on them.
Measure out three feet of the ten foot length.
You can actually use coat hangers for this step if you want just.
Sand the edges with.
Calculate the length of your antenna.
Strictly speaking a balun should be used when coax or coaxial cable is used.
Cut a small piece of wood plywood works well for this step into a 1 inch square.
Attach the wires to the fm radio.
Test and position the new antennas.
Cut off one end of the coaxial cable.
How to make a simple fm antenna.
Turn on the radio and tune it to a strong station.
One of the simplest types of antenna you can build is a dipole antenna which consists of two pieces of wire in line with one another and connected to a central feed.
More by the author.
Wrap the stripped ends of the wires around the terminals and then screw the lugs back into place.
Cut the copper tubing to half of the antennas overall.
This can either be open wire twin feeder or coax can be used.
Strip half of the antennas overall length from the end of the coaxial cable.
In the diagram each leg of the dipole antenna is joined to the feeder.
How to make an fm antenna using a coaxial cable gather the necessary materials.
Cut two pieces of stiff wire to 28 inches in length with wire cutters.
No comments:
Post a Comment